NEHRP Clearinghouse

Title
Seismic Response Modeling of Water Supply Systems.
File
PB2009107910.pdf
Author(s)
Shi, P.; O'Rourke, T. D.
Source
Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.; National Science Foundation, Washington, DC., May 5, 2008, 352 p.
Identifying Number(s)
MCEER-08-0016
Abstract
This report presents a comprehensive model for simulating the earthquake performance of water supply systems. The model is developed in conjunction with the water system operated by the Los Angeles Department of Water and Power (LADWP) and validated through comparisons to observations and flow measurements for the heavily damaged LADWP water supply after the 1994 Northridge earthquake. The earthquake performance of damaged water supply systems is simulated using hydraulic network analysis that uses an iterative approach to isolate the network nodes with negative pressures. The isolation process accounts accurately for reliable flows and pressures in the damaged water networks by removing unreliable flows and identifying those portions of the system requiring mitigation. An analytical model is developed to predict the effect of seismic waves on underground pipelines. The seismic performance of the LADWP system is simulated using a multiscale technique in which the LADWP trunk system is explicitly accounted for, while the remaining distribution lines are simulated through fragility curves relating demand to repair rate. The repair rate, in turn, is correlated with peak ground velocities, and fragility curves are developed on the basis of distribution network simulations.
Keywords
; Flow equations; Seismic waves; Earthquake damage; Water utilities; Performance evaluation; Earthquake engineering; Water supplies; Simulation; Seismic effects; Computer codes; Water flow; Pipelines; Mitigation