NEHRP Clearinghouse
displaying 1 - 8 results in total 8
Carden, L. P.; Itani, A. M.; Buckle, I. G.
Seismic Performance of Steel Girder Bridge Superstructures with Conventional Cross Frames.
Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.; California State Dept. of Transportation, Sacramento.; Federal Highway Administration, Washington, DC., January 7, 2008, 266 p.
Identifying Number(s): MCEER-08-0001
Keywords: ; Structural engineering; Seismic design; Bridges (Structures); Reinforced concrete; Steel bridges; Earthquake engineering; Superstructures; Excitation; Slabs; Girder bridges; Bearings; Loads (Forces)Carden, L. P.; Itani, A. M.; Buckle, I. G.
Seismic Performance of Steel Girder Bridge Superstructures with Ductile End Cross Frames and Seismic Isolators.
Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.; California State Dept. of Transportation, Sacramento.; Federal Highway Administration, Washington, DC., January 7, 2008, 282 p.
Identifying Number(s): MCEER-08-0002
Keywords: ; Seismic design; Frames; Structural design; Performance evaluation; Ground motion; Earthquake engineering; Buckling; Superstructures; Slabs; Vibration isolators; Girder bridges; Bearings; Loads (Forces)Buckle, I. G.; Friedland, I. M.; Power, M.; Fishman, K.
Seismic Retrofitting Manual for Highway Structures: Part 1. Bridges, and Part 2. Retaining Structures, Slopes, Tunnels, Culverts and Roadways.
Federal Highway Administration, Washington, DC.; National Science Foundation, Washington, DC., April 2008,
Identifying Number(s): MCEER-08-SP02-CD
Keywords: Seismic design; Bridges (Structures); Pavements; Retrofitting; Retaining structures; Culverts; Roadways; Earthquake engineering; CD-ROM; Highway bridges; Tunnels; Slopes; MCEER (Multidisciplinary Center for Earthquake Engineering Research)Kelly, J. M.; Buckle, I. G.; Tsai, H. C.
Earthquake Simulator Testing of a Base-Isolated Bridge Deck.
National Science Foundation, Washington, DC., January 1986, 123 p.
Identifying Number(s): UCB/EERC-85/09
Keywords: ; Simulators; Elastomers; Isolation; Bridge deck; Model tests; Dynamic response; Highway bridges; Superstructures; Bearing properties; EarthquakesKelly, J. M.; Buckle, I. G.; Koh, C. G.
Mechanical Characteristics of Base Isolation Bearings for a Bridge Deck Model Test.
National Science Foundation, Washington, DC., November 1987, 66 p.
Identifying Number(s): UCB/EERC-86/11
Keywords: Earthquake resistant structures; Structural vibration; Seismic waves; Compressing; Bridge decks; Highway bridges; Displacement; Cyclic loads; Vibration isolators; Bearings; Mechanical properties; RubberBuckle, I. G.
Proceedings from the U.S.-Japan Workshop on Earthquake Protective Systems for Bridges (1st). Held in Buffalo, New York on September 4-5, 1991.
National Science Foundation, Washington, DC.; New York State Science and Technology Foundation, Albany., February 4, 1992, 613 p.
Identifying Number(s): NCEER-92-0004
Keywords: Bridges; Earthquake resistant structures; Seismic design; Retrofitting; Buffalo (New York); Meetings; Vibration damping; Bearings; JapanBuckle, I. G.
Northridge, California Earthquake of January 17, 1994: Performance of Highway Bridges.
National Center for Earthquake Engineering Research, Buffalo, NY.; Federal Highway Administration, Washington, DC.; National Science Foundation, Arlington, VA.; New York State Science and Technology Foundation, Albany., March 24, 1994, 107 p.
Keywords: Damage assessment; Seismic design; Underpasses; Failure; Retrofitting; Overpasses; Earthquake engineering; Highway bridges; Los Angeles (California); EarthquakesBuckle, I. G.; Friedland, I. M.
Proceedings of the National Workshop on Bridge Research in Progress (4th). Held in Buffalo, New York on June 17-19, 1996.
National Science Foundation, Arlington, VA., January 1996, 482 p.
Keywords: ; Composite bridges; Bridge management; Retrofitting; Masonry bridges; Seismic performance; Earthquake engineering; Loads; Meetings; Highway bridges; Bridge condition; Bearings; Seismic effects